2322 574 10603

2322 574 1.... Vishay BCcomponents Surface Mount Multilayer Varistors FEATURES • Surface mount multilayer surge suppressor • Inherent bidirectional clamping • Low capacitance types available • Excellent energy/volume ratio • Suitable for wave or reflow soldering • Compliance to IEC 1000-4-2 Size 0805 (2012M) multilayer chip varistor with AgPd terminations. QUICK REFERENCE DATA PARAMETER VALUE UNIT DC 3.3 to 31 V • Data lines and I/O port protection AC 2.5 to 25 V • Protection against EMI and ESD transients 12 to 65 V 60 to 1300 pF • On-board protection of ICs and transistors 0.1 J APPLICATIONS Maximum continuous voltage: Maximum clamping voltage at 1 A Capacitance range Maximum non-repetitive surge energy (10 × 1000 µs) • Modem protection • LCD protection Maximum peak current (8 × 20 µs) 30 A Response time (typical) 0.5 ns PACKAGING Operating temperature range −55 to 125 °C Storage temperature range −25 to 45 °C Available in 8 mm paper tape on reel packaging and in bulk on request. 5 mW Maximum continuous dissipation ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM OPERATING VOLTAGE VOLTAGE(2) at 1 mA RMS(1) (V) DC (V) MIN. (V) MAX. (V) MAXIMUM CLAMPING VOLTAGE at 1 A (V) 2.5 3.3 4.1 6.0 12 1300 typ. 4.0 5.5 6.4 9.6 21 470 typ. 10403 6.0 8.0 8.8 13.2 27 300 typ. 10603 CAP. at 1 kHz (pF) TOL. (%) CATALOG NUMBERS 2322 574..... 12583 8.0 11.0 12.7 17.2 33 200 typ. 10803 10.0 14.0 15.3 21.0 35 110 typ. 11003 14.0 18.0 19.8 25.7 40 100 typ. 11403 17.0 22.0 24.3 29.7 46 90 typ. 11703 20.0 26.0 29.7 38.6 56 70 typ. 12003 25.0 31.0 35.1 45.6 65 60 typ. 12503 Notes 1. The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based on multiplying the peak voltage by a factor of 0.707. 2. The voltage measured at 1 mA meets the requirements of “paragraph 4.3 of CECC specification 42000”. Document Number: 29045 Revision: 10-Oct-03 For technical questions contact: nlr.europe@vishay.com www.vishay.com 9 2322 574 1.... Vishay BCcomponents Surface Mount Multilayer Varistors DIMENSIONS in millimeters W T L W T 2.0 ±0.2 1.25 ±0.15 0.8 ± 0.15 L V/I CHARACTERISTIC MAX. CLAMPING VOLTAGE MAX. LEAKAGE CURRENT 1000.000 VOLTAGE (V) VOLTAGE (V) MAX. CLAMPING VOLTAGE MAX. LEAKAGE CURRENT 100 10 1 100.000 10.000 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 CURRENT (A) CURRENT (A) 57xx1003 57xx0803 57xx0603 57xx0403 57xx2583 57xx2503 57xx2003 57xx1703 57xx1403 TESTS AND REQUIREMENTS TEST / CONDITIONS OF TEST D OR ND* PROCEDURE PERFORMANCE ND Sub-group A1 Visual examination “IEC 4.3.1” no visible damage ND Sub-group A2 Voltage (CECC 4.3); Clamping voltage (CECC B.2.7) at 1 mA as specified ND Sub-group A3 Dimensions (gauging) “IEC 4.3.3” see 4.3.3 D Sub-group B1 Solderability: Test Td of “IEC 60068-2-20”, solder bath method 235 °C ±5 °C for 5 ±0.5 s; at 1 mA no visible damage; as in 9.2.1; as specified * D = Destructive, N = Non-destructive www.vishay.com 10 For technical questions contact: nlr.europe@vishay.com Document Number: 29045 Revision: 10-Oct-03